Asbestos Abatement Procedures

Understanding Basic Asbestos Abatement Procedures

Asbestos is a dangerous component that can be found in some parts of many houses built before 1990. These include the insulation, roof shingles, furnace, and other areas. Many studies have shown that frequent exposure to this chemical can increase the risk of developing cancer and other fatal health issues. Fortunately, you can have certified asbestos professionals check for the presence of asbestos in your home and take necessary action to protect your family. In this post, we’ll show you the procedures required for asbestos removal Adelaide to help you make the right decision.

Starting with asbestos inspections

Before starting any renovation projects, it is necessary to find an experienced inspector to check for asbestos in the construction area and other parts of your home such as any cracking or crumbling walls. Such general wear and tear would damage and release any asbestos in your home, thus affecting the health of any workers and family members involved in the project.

If the inspector identifies the presence of asbestos, he should give you a written evaluation which specifies details where to find this mineral. Also, he can make a recommendation to prevent further damage.

Finding the right asbestos abatement contractor

There are state and federal strict laws that specify how asbestos should be removed or disposed of due to the dangers of its exposure. Therefore, it is compulsory to find a licensed contractor for this process to ensure that all regulations are followed.

The best place to find the right asbestos abatement contractor is a training agency which oversees the certification process. In most cases, these agencies often give you a list of the experts in the local who meet the appropriate certification requirements at federal and state level.

The basic process of asbestos abatement

Once you have chosen an asbestos abatement contractor, make sure to understand the actual process to ensure the encapsulation or removal is handled according to the specified regulations.

– Understanding the plan

Before any tasks start, you should get a written contract which has the detailed plans, including each step and an explanation of all the regulations that they must abide by. These also include the requirements of notification for a local agency.

– Proper demarcation

As the encapsulation and removal go underway, the construction area should be marked clearly as a hazardous site. No household occupants should be allowed around or in the area. To prevent any fibres from spreading to other rooms, your contractor should also turn off the air conditioning and heating system.

– Handling asbestos wastes

Workers must not break removed materials or items into smaller pieces for easy cleanup because it could release toxic fibres. Instead, all asbestos materials need to be wet during a cleanup and removal. This prevents any loose fibres from becoming airborne or spreading.

– Cleanup procedures

The work site should always be clean and free of debris. During a cleanup, workers must seal and label all asbestos-containing materials correctly in heavy-duty plastic bags. This avoids the contamination into other areas in your house. After that, the area will be cleaned thoroughly with wet rags and mops to ensure complete removal of asbestos dust.

Upon completion, the contractor will give another written record which explains the procedures that were done and were followed.